Page 9
The display will provide you with step-by-step configuration status. When complete, the display shows:
CONFIGURE Living Room
COMPLETED
Once completed, press the ' * ' key to return to the Status display.
STEP 3
Press the down arrow to display the next named device.
Configuring Lighting Loads
If the named unit that is displayed is a Lighting Load (i.e. Dimmer or Switch), go to the specified HAI UPB™ Wall Dimmer or Switch
and put it in Setup mode as follows:
Lighting Load Setup
Step Operation
1
Tap the rocker switch quickly 5 times.
2
The HAI UPB™ Wall Dimmer or Switch will flash the lighting load one time and blink its LED blue to indicate that it is
in Setup Mode.
Note:
The switch will automatically exit Setup mode after 5 minutes. To manually exit Setup mode, tap the switch
quickly 2 times.
Back at the Lumina keypad, press ' # # '. The display shows:
CONFIGURE -Cans
STARTING
The display will provide you with step-by-step configuration status. When complete, the display shows:
CONFIGURE -Cans
COMPLETED
Once completed, press the ' * ' key to return to the Status display.
