V.
CALIBRATION
B. PROGRAMMING THE RAVEN CONSOLE
69
THIS IS JUST A GUIDE TO GET STARTED!
REFER TO THE RAVEN INSTALLATION
AND OPERATION MANUAL FOR MORE INFORMATION AND TROUBLE SHOOTING.
Depress
to select.
Enter the number of gallons per acre that you wish to
apply using the number keys
1-0
.
Depress
when finished.
This number is based on the preference of the op-
erator, the conditions of the spray job, and the product
being applied. Read all chemical manufacturer’s in-
structions before entering this calibration.
* Watch the decimal placement!*
Enter
If you are applying multiple
products, you must repeat
the previous steps for each
product. The active prod-
uct will be highlighted.
The display will display
WHEEL-SP1 or RADAR-
SP2
.
Depress
until
RADAR– SP2
is displayed.
Momentarily depress
to select.
You will need to select
RADAR– SP2
on your Hagie
sprayer. The sprayer is actually set up with a wheel
drive speed sensor, but the pulse rate requires a radar
setting.
CE
Enter
Continued on next page
The display will now dis-
play
RATE CAL
.
Enter
CALIBRATION
