IV.
OPERATING SYSTEMS
29
OPERATING SYSTEMS
WINDSHIELD WIPER AND WAHSER FLUID SWITCHES–
The
windshield wiper switch (fig. 4.29-3, item A) located on the right side of the
headliner , turns on the wipers (fig. 4.29-5 and 6). The wiper will continue to
operate until the switch is returned to the OFF position.
To activate the deluge system pump, press the washer fluid switch (fig.
4.29-3, item B) and hold until the desired
amount of fluid is dispensed and then re-
lease the switch. You must turn the wiper OFF
when the washer fluid has been completely wiped
away. The deluge tank is located behind the solu-
tion tank (fig. 4.29-4).
FIG. 4.29-3
FIG 4.29-4
FIG 4.29-5
A. CAB
SPRAY SYSTEM INDICATOR LIGHT–
The
spray system indicator light (fig. 4.29-1, item A) will
illuminate when the main spray control on the hydro-
static lever (fig. 4.29-2) has been activated. If the
light is not on, the spray system is not on. This light
will also illuminate when using the plow brushes.
MDM–
The MDM (fig. 4.29-1, item B) is also
referred to as the message center. The MDM takes the place of the conventional gauges. The MDM can give
you information on tread adjust width, engine RPM, engine oil pressure, hour meter, fuel level, coolant tem-
perature, tire size, battery voltage, speed range, and machine program version. The information can be viewed
by using the up and down arrows to move through it. The MDM will also display any faults found in the moni-
tored systems.
FIG. 4.29-1
A
B
FIG. 4.29-2
B
A
FIG. 4.29-6
Left side
Right side
