62
IV.
OPERATING SYSTEMS
E. OPERATING THE QUICK-ATTACH SYSTEM
PULL INTO THE ATTACHMENT
– Slowly pull into the boom.
ARE THE HOOKS HIGH ENOUGH?
- Check to see that
the quick attach hooks are high enough to clear the lock pins (fig.
4.62-1). Due to soil settling or the difference in the airbag pressure
without the boom on, you may need to let some air out of the air-
bags using the relief valves. If your machine is not equipped with
the valves, you will need to call Hagie Customer Service and pur-
chase airbag relief valve kits and install them on the front leg as-
semblies.
Once you have made any necessary adjustments you can
continue to drive into the boom until the hooks are above the lock
pins.
RECONNECT ALL HYDRAULIC,ELECTRICAL,
AND SOLUTION LINES
– Reconnect all the necessary lines
between the machine and the boom. If connecting to another
attachment other than the boom, make sure that you read the
operator and parts manual for the attachment and understand
how to connect it.
FIG. 4.62-2
FIG. 4.62-1
Turn the engine OFF before disconnecting
any hoses or electrical lines! Failure to do so
may result in serious injury or death.
OPERATING SYSTEMS
