IV.
OPERATING SYSTEMS
28
A. CAB
Overhead Controls and Monitors
FIG. 4.8A-4
FIG. 4.8A-1
A
B
C
D
FIG. 4.8A-2
A.
Hagie Diagnostic Port
B.
Warning Indicator Light
C.
Spray System Indicator Light
D.
MDM
E.
Wiper switch
F.
Washer Fluid switch
G.
Field Lights switch
H.
Work Lights switch
I.
Mirror switch
J.
Climate Control– fan
K.
Climate Control– temp
L.
Raven Monitor
M.
Plow Control decal
N.
Vents
HAGIE DIAGNOSTIC PORT–
The Hagie diagnostic port (fig.
4.8A-1, item A) is used for diagnostic purposes only. The Hagie Cus-
tomer Service department can hook into your system to gather informa-
tion on faults and malfunctions of the machine. From this port, they
would also be able to reprogram the machine if it became necessary.
This port is not for the use of personal computers or personal digital
assistants (PDA’s).
The port is protected by a 10 amp fuse.
WARNING INDICATOR LIGHT–
The warning indicator light (fig. 4.8A-1, item B) will come on if there
are any malfunctions or faults in the systems monitored by the MDM. These warnings include, but are not lim-
ited to: engine oil pressure, oil level, hydraulic oil level, coolant temperature, battery voltage, and fuel level. An
explanation of the fault will appear on the screen. If a fault appears, shut engine off immediately and resolve
the fault before continuing. Failure to do so may result in damage to the system with the detected fault.
J
K
FIG. 4.8A-6
N
OPERATING SYSTEMS
E
F
G
H
I
L
FIG. 4.8A-3
M
