14
Technical changes reserved
Output
Digital
Analog
Output
Input 1 Input 2
0-10 V
4-20 mA
Input
PT100
Input 1
Input 2
0,6 A
24 V
=
I
1
I
2
4-20 mA
F1
2,5 A
230V AC
24V DC
6 A (C)
Ph - N
Regulator
6. Power supply and Input / Output cabling
6.1 Power supply
The HTG410H requires a 24 VDC +-10% voltage supply installed near
it. It must be Safety Extra Low Voltage (SELV) type, with galvanic
isolation between the power supply input (AC voltage) and the
power supply output (DC voltage). The rated AC voltage of the
power supply input must be 240 VAC.
Here under a global overview for the cabling possibilities and power
supply preconisations.
HTG410H
Power supply and Input / Output cabling
Recommendations:
You should protect the I/O cabling, in order to ensure the bus
communication in the event of a short-circuit on the actuator side.
F1: miniature fuse 5/20, rating 2,5A F or lower, (according to
the load). The wiring for the I/O information’s should be done with
screened twisted pair cable.
Remember:
For the cable connection or removing, please insert the screwdriver
(0.4 x 2.5) and push straight.
2,5 mm
0,4 mm
Regulator
