40
x 1
3 sec.
x 1
x 1
x 1
x 1
3 sec
Technical changes reserved
HTG410H
Devices installation and settings
7.1.3.7.2 Test with error detection
Existing errors Err1 / 2 / 3 can be resolved automatically by selecting
the corrective function, this eliminates the need for re-wiring.
For the Err 4 / 5 / 6 the modification must be performed manually by
correcting the voltage connections
Fig. 10.19 Starting / closing the function test
- Start the function test
- Select the corrective function
- Select the corrective function
- Confirm input
- Close the test.
Back to display mode
Example: Err 2 - current transformer connection of phase 2
