24
Technical changes reserved
7.1.1.6.1 Example of test without error
Press and hold button "Test" for at least 3 seconds to start testing
the connections. If, as shown in the example, no error is found,
press and hold button "Test" again for at least 3 seconds to return
to display mode.
HTG410H
Devices installation and settings
7.1.1.6.2 Test with error detection
Existing errors Err1 / 2 / 3 can be resolved automatically by selecting
the corrective function, this eliminates the need for re-wiring.
For the Err 4 / 5 / 6 the modification must be performed manually by
correcting the voltage connections.
- Select the
corrective
function
- Select the
corrective
function
- Confirm
input
- Close the
test. Back
to display
mode
- Start the
function test
1x
3 seconds
LI
LI
L2
L2
L3
L3
1x
3 seconds
1x
3 seconds
1x
1x
1x
