hager h3+, Communication Instruction Manual

Page: 20 / 127

20
6LE005550A
Description of the h3+ communication system
2.3 HTP610H h3+ configuration tool
2.3.1
Field of application
The h3+ configuration tool is particularly recommended for configuration, testing,
commissioning and diagnostic operations on h3+ circuit breakers with electronic
trip units (LSnI, LSI, LSIG, Energy).
HTP610H configuration tool
lt enables users to do the following:
- View the status of the Energy circuit breaker and its identification parameters
- Synchronise the date and time of the Energy circuit breaker
- Set all the parameters of the Energy circuit breaker
- Activate/deactivate data write permission in order to prevent any remote
modifications
- Display the electrical variable measurements in real-time and variables
calculated.
- Perform the LSnI, LSI, LSIG and Energy trip unit test
- Test the activation of the Energy circuit breaker output contacts
- Manage the predefined alarms and customisable alarms
- View the event logs (trips, operations, alarms, settings)
- Manage user accounts
- Update the configuration software and re-generate passwords for
communicating accessories.
2.3.2
Energy trip unit test
The HTP610H configuration tool is used to test and check the operation of the LSnI,
LSI, LSIG and Energy circuit breakers. The test involves checking that the electronic
and mechanical chain of the trip unit trips correctly after simulating overload
currents and short circuits.
This test can be configured as follows:
- Individual or total on phase pole, neutral pole or ground fault protection
- Automatic, semi-automatic or manual test
- Inclusion (or not) of the overload pre-alarm threshold and the overload alarm
threshold
This test function is also used to display the trip curve.