03
04
05
06
Cut two lockers
A4
from frame
78-02
. These fit on
the searchlight platform behind the funnel, as shown.
Glue in place.
Cut the steam whistle
A2
from frame
78-02
. Check
the fit at the rear of the funnel: a peg on the base of
the whistle fits into a slot in the funnel. Glue in place.
Take the railing and platform, part E (from frame
77-02
), which was shaped in the previous stage’s
instructions. Fit the platform of part E around the
base of the steam whistle
A2
. Glue in place.
The remaining two parts from frame
78-02
, parts
A1
and
A3
, fit on the foremast platform
78-01
. Glue in
place as shown.
Cut the two supports
B1
from frame
78-04
and bend
them to form pyramid shapes, as shown (see also
steps 4 and 5, opposite).
Cut the two supports
B2
from frame
78-04
. Study
the photograph carefully, noting where the sides of
the parts differ. Bend both sides up at right angles, to
create two identical supports.
01
02
02
. METAL PARTS FOR THE FUNNEL
78-01
A2
A2
E
A1
A3
B1
B1
B2
B2
A4
33
33
AGORA
MODELS
34
AGORA
MODELS
