05
. SEARCHLIGHT HOODS AND LADDERS
05
06
Cut the next two ladders
E2
from frame
76-11
and
bend the pegs at right angles, as shown.
Finally, cut the two short ladders
E3
from frame
76-11
and bend the pegs at right angles, as shown.
In the same way, fit the second hood
76-04
to the
rim of the protective hood
65-02
on the port side
of the funnel.
Cut the two long ladders
E1
from frame
76-11
. Bend
the four pegs at right angles. Then bend the lower
end of each ladder slightly outwards, as shown.
65-02
76-04
E1
E2
E3
03
04
Take one of the searchlight hoods
76-04
. The hood has
two holes at the hinge points (arrow), which fit over pegs
on the side of the hood rim
65-03
on the starboard side
of the funnel. Note the position of the notch on the hood
(see step 2). This is a push-fit connection.
The hood
76-04
pivots on the hinge points. A small
notch on the top (blue arrow) fits over a raised tab
on the rim of part
65-03
(red arrow) to hold the
hood closed.
01
02
65-03
76-04
76-04
65-03
27
27
AGORA
MODELS
28
AGORA
MODELS
