Hach Ultra ORBISPHERE 3625, Operator'S Manual

Page: 32 / 96

26 of 90 OrbiPack PC Software - 3625 Package Analyzer
Operator Manual
ORBISPHERE
3.1.6 Warning Messages
During measurements, warning messages may pop up informing the user of potential
problems with the measurement.
The error will point the user to a table for more information. For example
See table ID 09
as illustrated in the illustration below left.
For more information refer to the table in “OrbiPack Software Error Messages” on
page 78 . The
table ID
displayed in the warning message, cross-references the value in
the column entitled
Error No
.
3.1.7 Selecting Measurement Data
A number of options described in the following sections require that one or more
measurement lines are selected from the table data (see, for example,
“Statistics” on
page 33 ).
The following process describes how to select measurement lines:
• Select an individual measurement by moving the cursor over the measurement
number in the left most column. An arrow symbol will appear. Left click on the
mouse to select it. The selected measurement line will be highlighted.
• Select multiple adjacent measurements by selecting an individual line as
described above, and then dragging the arrow symbol over the measurements to
change while holding down the left mouse button.
• Select multiple non-adjacent measurements by selecting an individual line as
described above, and then select the additional measurements to change while
holding down the
Ctrl
button on the keyboard.
Note:
If an option is selected where one or more measurement lines need to be selected, but
none are selected using the processes above, then the last measurement line will be
selected by default.