Hach Ultra ORBISPHERE 3625, Operator'S Manual

Page: 84 / 96

78 of 90 Troubleshooting - 3625 Package Analyzer
Operator Manual
ORBISPHERE
9.2 OrbiPack Software Error Messages
See also “Table Settings” on page 32 for details on how to view the error flags on the
measurement display.
The error flag is a 32 digit field filled with either a zero or one (0 = OK and 1 = error). On
completion of a measurement, check the status of the error flag. If any of the digits are
set to 1 indicating an error, refer to the table below to determine the probable cause.
For example, an error message of 000
1
00000
1
0000000000000000000000 has the flag
positions 4 and 10 set to 1. From the table below, this indicates problems in the fill
reservoir and bottle piercing stages. The likely reason for each problem is indicated in the
probable cause column of the table.
The error number column relates to pop-up warning messages during measurement
(see
“Warning Messages” on page 26 ).
Operation
Error
No.
Flag
Pos.
Probable Cause
O
2
stability
60 1
Measure deviation for the last 5 measurement is over the
threshold value set in the
option
menu (
O2 stability
).
Fill reservoir
7 3
Forcing gas pressure set too high.
8 4
Low forcing gas press.
Foam in the system.
Raise piercing
lever
14 5
Lever not up, package pressure still present.
Wrong calibration of pressure sensors (int. or ext.).
Blocked electro valve.
15 6
The pressure gradient indicates a clogged filter.
Rinsing
17 8
Forcing gas pressure set too high.
Gas filter clogged.
Bottle pierced
21 10
Leak in testing system.
Package is empty.
Pierce package
20 11
Product filter clogged.
Low package pressure.
Poor piercing, too slow.
Head-space
19 12
Leak or foam in system.
22 13
Leak or foam in system.
23 14
Leak or foam in system.