HACH LANGE ORBISPHERE 6110 User Manual Download Page 21 | Manualshive

Page: 21 / 76

background image

19

Section 3

Installation

3.1 Unpacking

Carefully remove the instrument and its accessories from the box and packing material,
referring to the packing list included to confirm that everything has been delivered. Please
visually inspect the instrument for shipping damage. If anything is missing or damaged, contact
the manufacturer or your dealer immediately.

You may want to retain the box and other packing material in case you later need to ship the
instrument. Please dispose safely and ecologically of the box and packing material (if not stored
for future use).

Please read through this manual thoroughly before carrying out the installation.

3.2 Main components

Factory supplied

Your 6110 Total Package Analyzer is shipped with the following components:

WARNING

This section provides necessary information to install and connect the analyzer. The
installation of the analyzer should be performed in accordance with relevant local regulations,
and only by personnel trained and experienced in the installation of the 6110 analyzer.
Disconnect the power supply of the analyzer before carrying out any work inside the analyzer.
Any work inside the analyzer should be performed exclusively by personnel specialized and
authorized to work on electrical installations. In addition, and in accordance with safety
standards, it must be possible to disconnect the power supply of the analyzer in its immediate
vicinity.

WARNING

Electrical danger and fire hazard. Only use the supplied power cable. Only qualified experts
may perform the tasks detailed in the installation section of this manual, while adhering to all
locally valid safety regulations.

CAUTION

Proper ESD (electrostatic discharge) protocols must be followed to prevent damage to the
product when working with the electronic boards.

CAUTION

The instrument is heavy (55 kg) so extreme care must be taken with handling to avoid
damaging the instrument or inflicting personal injury. It is

highly recommended

to use a

pulley system (or similar) attached to the lifting ring located on the top of the instrument when
unpacking. The instrument should always be moved and stored in a vertical position.

NOTICE

To avoid personal injuryIt is recommended to use a pulley system to rem.

Equipment included

Part No.

Instrument

6110 instrument including all sensors pre-installed

Installation kit

2.5 mm Allen key
Power supply cable
Protection film for screen
Protection for rim detector x4
Seal to package (6 items)

33117

«
...
19
20
21
22
23
...
»

Summary of Contents for ORBISPHERE 6110













































































Reviews:

No comments

Related manuals for ORBISPHERE 6110

Brand: BANTE inststruments Pages: 15

Brand: 3Bays Pages: 21

Brand: Keithley Pages: 48

Brand: Unico Pages: 96

Brand: ZHYQ Pages: 6

Brand: Kawai Pages: 8

Brand: aci Pages: 5

Brand: Conrad Electronic Pages: 38

Brand: Laserworld Pages: 5

Brand: XS Instruments Pages: 41

Brand: wattwatchers Pages: 14

Brand: X-Rite Pages: 54

UNITY INOVA NMR

Brand: Varian Pages: 65

Brand: Percussion Play Pages: 3

Brand: Oakton Pages: 8

Brand: Radiation Alert Pages: 22

Brand: Canary Pages: 19

Pulse sens'O Atex zone 1 50-70-123

Brand: WATTECO Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands