79
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 2586 Jul/30/2010 05:33:04 N/A cfa0:/system.xml |
|2 39709988 Jul/30/2010 06:00:54 M cfa0:/wx6103.bin |
|3 1094 Jul/30/2010 04:40:18 N/A cfa0:/startup.cfg |
============================================================================
To set an application file type
Step1
Select
2
in the file control submenu. The following information appears:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
================================================================================
|NO. Size(B) Time Type Name |
|1 39709988 Jul/30/2010 06:00:54 M cfa0:/wx6103.bin |
|0 Exit |
================================================================================
Enter file No:
Step2
Enter the file number at the prompt above. In this example, type
1
for
wx6103.bin
, and press
Enter
. The
system prompts you to specify a new file type:
Modify the file attribute:
================================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
Summary of Contents for WX6103
