H3C WX6103, Installation Manual, Page: 59 / 90

51
Step2
Configure the IP addresses for both sides, which must be on the same subnet. For example, set the IP
address of the TFTP server to 192.168.0.1, and that of the access controller’s management Ethernet
interface to 192.168.0.2. Then use the ping command to verify the network connectivity.
Step3
After setting up the environment, view the files in the current file system by using the dir command.
<H3C>dir
Directory of cfa0:/
0 -rw- 1270 Dec 02 2010 15:56:52 system.xml
1 -rw- 31762740 Dec 02 2010 15:46:30 wx6103.bin
2 -rw- 988 Dec 02 2010 15:56:52 startup.cfg
3 drw- - Jul 08 2009 16:02:58 logfile
250380 KB total (219336 KB free)
File system type of cfa0: FAT32
Backing up the application and configuration files
To backup wx6103.bin on the access controller by saving it as wx6103.bin on the TFTP server, use the
following command.
<H3C>tftp 192.168.0.1 put wx6103.bin wx6103.bin
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait...
TFTP: 31762740 bytes sent in 52 second(s).
File uploaded successfully.
CAUTION:
When you back up a file to the server, this file will overwrite a file that has the same name on the server.
Upgrading the application and configuration files
To download wx6103.bin from the TFTP server to the access controller and save it as wx6103.bin , use the
following command.
<H3C>tftp 192.168.0.1 get wx6103.bin wx6103.bin
If a file with the same name already exists on the access controller, the system will ask you whether to
overwrite the existing file. Enter Y to overwrite it, or N to abort.
The file wx6103.bin exists. Overwrite it?[Y/N]:y
Verifying server file...
Deleting the old file, please wait...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...
TFTP: 31762740 bytes received in 63 second(s)
File downloaded successfully.
Maintaining the access controller through FTP
The access controller serving as the FTP server
When the access controller serves as the FTP server, you can use your PC as an FTP client to log in to the
access controller for file operations.