H3C UniServer R4900 G3, User Manual

Page: 119 / 299

110
2.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
3.
Remove the access panel. For more information, see " Replacing the access panel ."
4.
Remove the RC-2*FHFL-2U-G3 riser card. For more information, see " Replacing a riser card
and a PCIe module ."
5.
Disconnect PCIe signal cables from the RC-Mezz-Riser-G3 Mezz PCIe riser card.
Figure 139 Disconnecting PCIe signal cables from the RC-Mezz-Riser-G3 Mezz PCIe
riser card
6.
Loosen the captive screw on the module, and pull the module out of the chassis, as shown
in
Figure 140 .
Figure 140 Removing the RC-Mezz-Riser-G3 Mezz PCIe riser card
7.
Install a new RC-Mezz-Riser-G3 Mezz PCIe riser card and the RC-2*FHFL-2U-G3 riser card.
For more information, see "
Installing riser cards and PCIe modules ."
8.
Install the access panel. For more information, see " Replacing the access panel ."
9.
Rack-mount the server. For more information, see " Installing the server ."