36
Figure 35 Installing the riser card
7.
Connect PCIe module cables, if any.
8.
Install the access panel. For more information, see "
9.
Rack-mount the server. For more information, see "
10.
Connect the power cord. For more information, see "
11.
Power on the server. For more information, see "
Installing an RC-2*FHFL-2U-G3 riser card and a PCIe
module
The RC-2*FHFL-2U-G3 riser card can only be installed on PCIe riser connector 1.
To install an RC-2*FHFL-2U-G3 riser card and a PCIe module:
1.
Power off the server. For more information, see "
2.
Remove the server from the rack. For more information, see "
Removing the server from a rack
."
3.
Remove the access panel. For more information, see "
."
4.
Install an RC-Mezz-Riser-G3 Mezz PCIe riser card. As shown in
, place the module
onto the system board, with the pin holes on the module aligned with the guide pins on the
system board. Then, fasten the captive screws on the module to secure it into place.
