42
4.
Remove the blank from PCIe riser connector 3, as shown in
.
5.
Remove the power supply air baffle. For more information, see "
."
6.
Install the PCIe module to the riser card:
a.
Remove the screw on the PCIe module blank in the target PCIe slot, and then pull the blank
out of the slot, as shown in
Figure 47 Removing the PCIe module blank
b.
Insert the PCIe module into the slot along the guide rails and use the screw to secure it into
place, as shown in
.
Figure 48 Installing the PCIe module
7.
Install the riser card bracket
and use screws to secure it into place, as shown in
.
Figure 49 Installing the riser card bracket
