61
c.
Use a T30 Torx star screwdriver to tighten the four retaining screws on the radiator.
CAUTION:
Adjust the screwdriver torque to 0.9N·m (8in-lbs); otherwise it may cause poor processor
contact or damage the pins in the processor base.
8.
Install the removed air baffle.
9.
Install the access panel. Align the standouts on the access panel with the notches in the
chassis side panels, place the panel onto the chassis, and slide the panel to the server front
until the panel is securely locked.
10.
Install the blade server.
11.
Power on the blade server. For more information, see "
Verifying the replacement
Use one of the following methods to verify that the processor has been replaced correctly:
•
Access the BIOS. For more information, see the BIOS user guide for the server.
•
Log in to OM. For more information, see the OM online help.
•
Log in to HDM. For more information, see
H3C Servers HDM Online Help
.
Expanding the processor
For details, see the quick installation guide of processor.
Installing and setting up a TCM or TPM
This section introduces the detailed installation steps of the TPM/TCM module and how to enable
the TPM/TCM module functions.
Operation scenario
Expand the TPM/TCM module.
Prerequisites
Take the following ESD prevention measures:
•
Wear antistatic clothing.
•
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
•
Do not wear any conductive objects, such as jewelry or watches.
