50
•
Remove the blade server.
•
When you replace a component, examine the slot and connector for damages. Make sure the
pins are not damaged (bent for example) and do not contain any foreign objects.
•
You might also remove other components. For the removed components to be reinstalled
correctly, record their positions and connections before removal, for example, taking pictures of
cable connection and drive installation positions, or labeling cables.
•
For the specific installation rules of GPU card, see "
."
Removing the GPU card
1.
Remove the access panel. Press the unlock button on the access panel, slide the panel to the
server rear, and lift the access panel.
2.
Remove the GPU card. Lift the GPU card up to remove it from the server.
Installing the GPU card
1.
Install the GPU card.
a.
(Optional) Remove the filler panel. Lift the filler panel up.
b.
Insert the GPU card downward as aligning the two mushroom-shaped heads on the GPU
card with the two notches on the blade server.
2.
Install the access panel. Align the standouts on the access panel with the notches in the
chassis side panels, place the panel onto the chassis, and slide the access panel to the server
front until it is secured into place.
3.
Install the blade server.
4.
Power on the blade server. For more information, see "
•
Log in to the OM web UI and check whether the GPU card information is correct. For the
specific methods, see the
OM Online Help
.
•
Log in to the HDM web UI and check whether the GPU card information is correct. For details
on how to modify it, see
HDM Online Help
.
Replacing the NIC
This section describes the detailed steps for replacing the standard PCIe network card and
mezzanine network card.
Operation scenario
•
The standard PCIe network card or Mezz NIC fails.
