36
Table 25 Default OM parameters
Item
Default value
Username
Admin
Password
Password@_
IP address of the
management port
192.168.100.100/24
The default IP address, default username and password for the blade server HDM management port
are shown in
Table 26 Default HDM parameters
Item
Default value
Username
Admin
Password
Password@_
IP address of the
management interface
Obtained from the DHCP server
Connecting the blade server to a network
Connecting through the management module
Use either of the following methods to connect the blade server to the network through the
management module:
•
Connect the network cable to one of the four service ports on the management module.
Figure 22 Service ports on the management module
•
The management module provides a management port (MGMT) to which a network cable is
connected. Thought this port, you can log in to the chassis OM and the HDM of the blade server
to monitor the operating status of the chassis and the blade server and set basic information.
