56
•
You might also remove other components. For the removed components to be reinstalled
correctly, record their positions and connections before removal, for example, taking pictures of
cable connection and drive installation positions, or labeling cables.
Removing the NVMe VROC module
1.
Remove the access panel. Press the unlock button on the access panel, slide the panel to the
server rear, and lift the access panel.
2.
(Optional) Remove the riser card and PCIe card that prevent users from accessing the NVMe
VROC module.
3.
Remove the NVMe VROC module. Hold the ring part of the NVMe VROC module and pull the
module out.
Installing the NVMe VROC module
1.
Install a new NVMe VROC module. Insert the NVMe VROC module onto the NVMe VROC
module connector on the system board.
2.
(Optional) Reinstall the removed riser card and PCIe card.
3.
Install the access panel. Align the standouts on the access panel with the notches in the
chassis side panels, place the panel onto the chassis, and slide the panel to the server front
until it is secured into place.
4.
Install the blade server.
5.
Power on the blade server. For more information, see "
6.
(Optional) Configure RAID for the NVMe drive. For the specific methods, see the BIOS user
guide of the product.
Replacing the DIMM
This section describes the detailed steps for replacing the DIMM.
Operation scenario
•
The DIMM fails.
•
Replace the DIMM with another model.
•
Expand the DIMM.
•
The DIMM hinders maintenance of other parts.
