52
NOTE:
The MPU and interface module slots use the same type of filler panels.
Figure 45
Filler panel for a power module slot
(1) Front view
(2) Side view
(3) Rear oblique view
(4) EMI gasket
Removing a filler panel
This section takes the filler panel for an interface module slot as an example.
To remove a filler panel:
1.
Face the front panel of the firewall.
2.
Loosen the two captive screws with a Phillips screwdriver until all pressure is released.
3.
Remove the filler panel.
(1)
(2)
(3)
(4)
1
2
3
4
