42
Logging in to the Web interface
The firewall supports Web login by default, and is provided with the following default Web login
information:
•
Username
—
h3c
for versions prior to F3210, and
admin
for F3210 and later.
•
Password
—
h3c
for versions prior to F3210, and
admin
for F3210 and later.
•
Management interface (M-GigabitEthernet 0/0) IP address
—192.168.0.1/24.
To log in to the Web interface:
1.
Connect a PC to the firewall's management interface M-GigabitEthernet 0/0 by using a crossover
Ethernet cable.
2.
Assign the PC an IP address in the network segment 192.168.0.0/24 (except for 192.168.0.1),
for example, 192.168.0.2.
3.
Launch a Web browser on the PC and enter
192.168.0.1
in the address bar.
The Web login page appears.
Figure 37
Web login page
4.
Enter the correct username, password, and verify code, select
English
as the language, and click
Login
.
NOTE:
The default account is used at the first login. To ensure security, you must delete the default account and
create an administrator account. For more information, see
H3C SecPath Series Firewalls and UTM
Devices Getting Started Guide
.
Logging in to the CLI through the AUX port
To allow AUX access, configure AUX access parameters:
Step Command
1.
Enter system view.
system-view
2.
Enter AUX user interface.
user-interface aux 0
