57
Figure 51
Pulling out the interface module
4.
Install a new interface module.
For the installation procedures, see "
Installing an interface module
."
If no new interface module is to be installed, install a filler panel.
For the installation procedures, see "
."
Replacing a CF card
CAUTION:
To avoid hardware damage, do not remove the CF card when the firewall is booting or the LED is flashing.
To replace a CF Card:
1.
Identify whether the CF card LED is flashing. If yes, the system is accessing the CF card. Proceed
to the next step after the LED stops flashing.
2.
Use a tool to push the eject button on the CF card slot all the way until the CF card in the slot ejects.
3.
Remove the CF card from the slot, and put the removed CF card in an antistatic bag or into its
original package.
