H3C MSR 20-20, Command Reference Manual

Page: 939 / 2742

939
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 2.2.2.1 Interface: Vlan2
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 00h20m52s
Tag: 0
Destination: 2.2.2.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoop0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h20m52s
Tag: 0
For detailed description of the above output, see Table 204.
display ip routing-table protocol
Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View Any view
Parameters protocol : Displays the routes of a routing protocol, not including routes
redistributed into the protocol. It can be bgp , direct , isis , ospf , rip , or static .
inactive : Displays only inactive routes. With this argument absent, the command
displays information about both active and inactive routes.
verbose : Displays detailed routing information. With this argument absent, the
command displays brief routing information.
Description Use the display ip routing-table protocol command to display routing
information of a specified routing protocol.
Examples # Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 6
Direct Routing table Status : < Active>
Summary Count : 6
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2
2.2.2.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
192.168.80.0/24 Direct 0 0 192.168.80.10 Eth1/0
192.168.80.10/32 Direct 0 0 127.0.0.1 InLoop0