H3C MSR 20-20, Command Reference Manual

Page: 1272 / 2742

1272 C
HAPTER
83: IP
V
6 IS-IS C
ONFIGURATION
C
OMMANDS
ipv6 enable
Syntax
ipv6 enable
undo ipv6 enable
View IS-IS view
Parameters None
Description Use the
ipv6 enable
command to enable IPv6 for the IPv6 IS-IS process.
Use the undo ipv6 enable command to disable IPv6.
IPv6 is disabled by default.
To run IPv6 IS-IS, you need enable global IPv6 capability, create an IS-IS process
with the
isis command, set a NET for the router with the network-entity
command, then use the ipv6 enable command to enable IPv6 for the process,
finally use the isis ipv6 enable command on relevant IS-IS interfaces to enable
IPv6 for them.
Examples # Create IS-IS routing process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
ipv6 filter-policy export
Syntax
ipv6 filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | route-policy
route-policy-name } export [ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]
View IS-IS view
Parameters acl6-number : Number of a basic or advanced IPv6 ACL used to filter redistributed
routes before advertisement, ranging from 2000 to 3999. Refer to “IPv6 ACL
Configuration Commands” on page 2103 for ACL information.
ipv6-prefix-name : Name of an IPv6 prefix list used to filter the redistributed routes
before advertisement, a string of 1 to 19 characters. Refer to “IPv6 Routing Policy
Configuration Commands” on page 1213 for IPv6 prefix list information.
route-policy-name : Name of a routing policy used to filter the redistributed routes
before advertisement, a string of 1 to 19 characters. Refer to “Routing Policy