H3C MSR 20-20, Command Reference Manual

Page: 489 / 2742

489
Examples # Enable debugging for link aggregation errors to view the error information
prompted during the system running.
<Sysname> debugging link-aggregation error
*0.21953 Sysname LAGG/8/lacpErrorEvent:
File e:v500d05sp1softwarelacplacp_agm.c, Line: 1200
ERROR------ Portindex: 1 LACP_SendLACPPacket ,g_ucLacpSysMAC NULL !
// File e:v500d05sp1softwarelacplacp_agm.c has a running error, which occurs at
line 1200. The ERROR field indicated that the system MAC address obtained is
null.
debugging link-aggregation event
Syntax
debugging link-aggregation event
undo debugging link-aggregation event
View User view
Default Level 1: Monitor level
Parameters None
Description Use the
debugging link-aggregation event
command to enable debugging
for link aggregation events.
Use the
undo debugging link-aggregation event
command to disable
debugging for link aggregation events.
By default, debugging for link aggregation events is disabled.
Table 78 Description on the fields of debugging link-aggregation error command
Field Description
File The program file that incurs a running error
Line The number of the line where the error occurs
ERROR Error description
Table 79 Description on the fields of debugging link-aggregation event command
Field Description
Agg Index Aggregation group ID
Cfg MD5 MD5 digest
Restriction Value Hardware restriction parameter
Admin Key Administration key
Port Pri Port LACP priority
Sys Mac System MAC address
Sys Pri System LACP priority
Oper Key Port operation key