H3C MSR 20-20, Command Reference Manual

Page: 577 / 2742

577
executing the shutdown command, configure the command, and then enable
the interface by executing the undo shutdown command. The operations,
however, will lead to the disconnection of the call existing on the interface.
You can configure this command on an interface only when the ISDN protocol
running on the interface is DSS1, Q.SIG, NI2, or ETSI.
Example # Ignore the Sending Complete Information Element in the received SETUP
messages.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn ignore sending-complete incoming
# Disable carrying the Sending Complete Information Element in the transmitted
SETUP messages.
[Sysname-Bri1/0] isdn ignore sending-complete outgoing
isdn L3-timer
Syntax
isdn L3-timer timer-name time-interval
undo isdn L3-timer { all | timer-name }
View ISDN interface view
Parameter timer-name : Name of a L3 timer of the ISDN protocol.
time-interval : Timer duration, which can take on one of the values listed in the
following table.
all : Restores the default durations of all the L3 timers.
Table 99 Description of Q931 timers
timer-name Timer-name
Value range (in
seconds) Default (in
seconds)
t301 T301 30 to 1200 240
t302 T302 5 to 60 15
t303 T303 2 to 10 4
t304 T304 10 to 60 30
t305 T305 4 to 30 30
t308 T308 2 to 10 4
t309 T309 10 to 180 90
t310 T310 10 to 180 40
t313 T313 2 to 10 4
t316 T316 20 to 180 120
t322 T322 2 to 10 4