H3C MSR 20-20, Command Reference Manual

Page: 1282 / 2742

1282 C
HAPTER
84: IP
V
6 OSPF
V
3 C
ONFIGURATION
C
OMMANDS
display ospfv3
Syntax
display ospfv3 [ process-id ]
View Any view
Parameters process-id : Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
Description Use the
display ospfv3
command to display OSPFv3 brief information. If no
process ID is specified, OSPFv3 brief information about all processes will be
displayed.
Examples # Display brief information about all OSPFv3 processes.
<Sysname> display ospfv3
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 0. These external LSAs’ checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 3
Number of LSA received 0
Number of areas in this router is 1
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 2. These LSAs’ checksum Sum 0x20C8
Number of Unknown LSA 0
Table 298 Description on the fields of the display isofv3 command
Field Description
Routing Process “OSPFv3 (1)” with ID 1.1.1.1 OSPFv3 process is 1, and router ID is
1.1.1.1.
SPF schedule delay Delay interval of SPF calculation
Hold time between SPFs Hold time between SPF calculations
Minimum LSA interval Minimum interval for generating LSAs
Minimum LSA arrival Minimum LSA repeat arrival interval
Number of external LSA Number of ASEs
These external LSAs’ checksum Sum Sum of all the ASEs’ checksum
Number of AS-Scoped Unknown LSA Number of LSAs with unknown
flooding scope
Number of LSA originated Number of LSAs originated
Number of LSA received Number of LSAs received
Number of areas in this router Number of areas this router attached
to
Area Area ID
Number of interfaces in this area Number of interfaces attached to this
area
SPF algorithm executed 1 times SPF algorithm is executed 1 time
Number of LSA Number of LSAs