H3C MSR 20-20, Command Reference Manual

Page: 2658 / 2742

2658 C
HAPTER
175: E1
AND
T1 C
ONFIGURATION
C
OMMANDS
After configuring a target match template with the match-template command
for a voice entity, you need to associate the entity with a logical interface to
indicate from which interface the traffic destined for the target should be routed.
Related command: timeslot-set , entity on page 2594, and pri-set .
Example # Associate a POTS entity with a TS group on an E1 interface.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] line 1/0:1
mode
Syntax
mode zone-name [ default-standard ]
undo mode
View R2 CAS view
Parameter zone-name : Country or region name. The argument can one of the following
values:
■
argentina : Uses Argentinean R2 signaling standard.
■
australia : Uses Australian R2 signaling standard.
■
bengal : Uses Bengalee R2 signaling standard.
■
brazil : Uses Brazilian R2 signaling standard.
■
china : Uses Chinese R2 signaling standard.
■
custom : Uses customized R2 signaling standard.
■
hongkong : Uses Hongkong R2 signaling standard.
■
india : Uses Indian R2 signaling standard.
■
indonesia : Uses Indonesian R2 signaling standard.
■
itu-t : Uses ITU-T R2 signaling standard.
■
korea : Uses Korean R2 signaling standard.
■
malaysia : Uses Malaysian R2 signaling standard.
■
mexico : Uses Mexican R2 signaling standard.
■
newzealand : Uses New Zealand R2 signaling standard.
■
singapore : Uses Singaporean R2 signaling standard.
■
thailand : Uses Thai R2 signaling standard.
default-standard : Initializes R2 signaling parameters such as values of the
force-metering command based on national R2 signaling variants.
Description Use the mode command to configure a national R2 signaling variant.