H3C MSR 20-20, Command Reference Manual

Page: 429 / 2742

429
Parameter dynamic : Displays VC switching table.
static : Displays SVC switching table.
Description Use the display x25 switch-table svc command to display SVC switching table.
With the keyword static included, the manually configured SVC switching table is
displayed.
With the keyword dynamic included, the VC switching table is displayed. VC
routing table is the link relationship between the node port number and the logic
channel number of the VC. VC routing table changes with calls: it is generated as
a call is established and it is cleared as the call is over.
Related command: x25 switch svc .
Example # Display X.25 SVC static switching table.
<Sysname> display x25 switch-table svc static
Number Destination Substitute-src Substitute-dst CUD SwitchTo(type/name)
1 11 I/Serial2/0
2 22 I/Serial2/1/0
3 131 H/hg1
4 132 T/123.123.123.123
5 133 T/123.123.123.123
6 111 222 333 T/4.4.4.4
Total of static svc is 6.
The item type of SwitchTo meaning:
I: interface H: hunt-group T: xot
display x25 vc
Syntax
display x25 vc [ lci ]
View Any view
Parameter lci : Logical channel identifier in the range 1 to 4095. If not specified, all VCs will be
displayed.
Description Use the
display x25 vc
command to display X.25 virtual circuit information.
Table 61 Description on the fields of the display x25 switch-table svc command
Field Description
Number Route sequence number in the switching table
Destination Destination X.121 address
Substitute-src X.121 source address after substitution; if the content is blank, it
means no substitution.
Substitute-dst X.121 destination address after substitution; if the content is blank, it
means no substitution.
CUD Call User Data
SwitchTo Forwarding address of this route, which can be an interface, XOT
channel or hunt group