H3C MSR 20-20, Command Reference Manual

Page: 382 / 2742

382 C
HAPTER
22: F
RAME
R
ELAY
C
ONFIGURATION
C
OMMANDS
# Display detailed state information about all frame relay bundle links.
<Sysname> display mfr verbose
Bundle interface:MFR1, Bundle state = up, Bundle class = A,
fragment enabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
dropped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
LID : Serial2/0 Peer LID: Serial2/0
Bound to MFR1(BID:2)
Physical state: up, link state: up,
Bundle link fragment size: 222,
Bundle Link statistics:
Hello(TX/RX): 10/10 Hello_ack(TX/RX): 10/10
Add_link(TX/RX): 4/2 Add_link_ack(TX/RX): 2/1
Add_link_rej(TX/RX): 0/0
Remove_link(TX/RX): 0/0 Remove_link_ack(TX/RX): 0/0
Pkts dropped(in/out): 0/0
Timer: ACK 4, Hello 10
Retry: Max 2, Current 0
Cause code: none
Bundle Link fragment statistics:
Mfr fragment(in/out): 0/0
Table 50 Description on the fields of the display mfr command
Field Description
Bundle interface Bundle interface
Bundle state Operating state of the bundle interface.
Bundle class Class A indicates if there is one bundle link is in up state,
the bundle is flagged as up. Moreover, all bundle links
should be tagged as down before the bundle is down.
fragment disabled Indicates whether the fragment is disabled (disabled in this
sample output)
MFR bundle fragment size Maximum fragment size allowed by the FR link
Bundle name Name of multilink frame relay bundle
Bundle links Physical interfaces of the links in the bundle.
Serial2/0, PHY state = up, link
state = up, Link name = Serial2/0 Physical interface on the bundle link, the operating state of
the physical layer interface and link layer interface, the link
name of the bundle link (corresponding name on the
physical interface by default)
Table 51 Description on the fields of the display mfr verbose command
Field Description
LID Identifier of the bundle link (to be the name of corresponding
physical interface by default)
Peer LID Identifier of the peer bundle link (to be the name of
corresponding physical interface by default).
Bound to MFR0 (BID:MFR0) The bundle link is bound to MFR0 on the interface MFR
Physical state Operating state of the physical interface.
link state Operating state of the link protocol on the bundle link.
Bundle Link statistics: Statistics about the packets on the bundle link.