GYS SPOT LIFT PRO, Manual

Page: 49 / 56

49
SPOT LIFT PRO
MADE IN FRANCE
EN
EN
Product description SPOT LIFT PRO
Serial number
Verification phase OK NOK Verification Note
Technical table on the jack
Load capacity in the table
Network pressure in the panel and on the control unit
Instructions for use (original)
Signalling up / down of the jack on the control unit
Tight fastening of all bearing screws
Tightening of nuts on all axes
Condition of pneumatic lines and ductwork
Safety valve set at 5.5 bar
Mains pressure gauge Pmax < 5.5 bar
The control lever automatically returns to the central position
when released.
Condition of removable arms, skids and pins
Condition of the central beam and axis fixing
Bellows condition
Condition of the supporting structure (scissors and trays)
Functional test of the lifting platform with vehicle
Control result
Commissioning is not allowed
No anomalies: commissioning granted
Security check carried out on : ............................................................................................................................
Name and address of the authorised person : ..........................................................................................................
Signature of the authorised person