background image

P/N: 02700

1

EN - OPERATING INSTRUCTIONS

(Translation of the original instructions)

Scissor jack 1,5T

 

ATTENTION:

 Read this operating and use manual before 

use or installation.

The supplier is not responsible for any damage or injury 

resulting from incorrect use not in accordance with the 

instructions.

EXPLANATION OF SYMBOLS USED

READ THIS OPERATING MANUAL BEFORE USING THE 

UNIT!

PROTECTIVE GOGGLES MUST BE WORN. Eye protection 

is compulsory when using the device.

USE PROTECTIVE GLOVES. Protective gloves should be 

used when carrying out certain jobs to increase 

operator safety.

GENERAL WARNING SIGN. The content preceded by the 

warning sign shall contain important information on the 

safe use of the device

PURPOSE

The device is not intended for use in professional factories 

but rather for use by do-it-yourself. The device is designed for 

lifting vehicles with the total weight not exceeding 1500 kg. 

The jack must be used only for lifting or lowering and must 

not be used to hold the raised vehicle. Use the jack only for its 

intended purpose. Max. rated weight refers to the maximum 

lift opening. Any use other than that described in this manual is 

not in compliance with the intended use of the device. Damage 

or injury resulting from improper use is the responsibility of 

the user/owner and not the manufacturer. Please note that 

our device is not intended for professional or industrial use. 

The guarantee agreement does not apply if the device has 

been used in craft or industrial facilities or for similar activities.

PRELIMINARY ACTIVITIES

Open the packaging and pull out the unit.  Remove protective 

film and transport securing (if fitted).  Check that the appliance 

and accessories have not been damaged in transit.  Keep the 

packaging until the warranty period has expired.

 

ATTENTION!

 The device and its packaging are not for 

play! Keep out of reach of children! Danger of swallowing or 

suffocation!

Steps to be taken before start-up. First check that all screw 

connections are firmly tightened. Then check that all moving 

parts are in good working order and that there are no cracks 

on the unit which could affect its proper operation.

RULES FOR SAFE USE

WORKPLACE

•  The workstation should be kept clean.

•  You must ensure that it is well lit.

• 

Insufficient  lighting  or  a  messy  work  area  can  cause 

accidents.

•  The ground on which the lift is set up must be solid, stable 

and durable. When using the jack, the weight of the vehicle 

being lifted is transferred to the ground via the jack. If the 

ground is uneven, unstable or of low mechanical strength, 

the jack may shift, e.g. tip over, which may lead to dangerous 

situations.

•   Keep children and bystanders away from areas where the 

lift is used.

•  Do not distract the user while operating the device may lead 

to loss of control of the tool and result in personal injury.

GENERAL SAFETY INSTRUCTIONS - PERSONAL SAFETY.

•  Do not use the unit when you are tired or under the 

influence of drugs, alcohol or medication as this may cause 

permanent damage to your health.

•  Wear protective gloves and goggles.

• 

Ensure that the jack is positioned on a firm and stable base 

before lifting.

•  Lifting vehicles when the ground is unstable can damage the 

vehicle and cause personal injury.

•  Maintain a stable posture when working with the unit. The 

correct working position ensures better control of the unit 

in unforeseen situations.

•  Dress appropriately. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving 

parts. Loose clothing, jewellery or long hair can be caught 

in moving parts.

•  Do not use the lift if you have not read this manual 

beforehand.

•  Do not lift vehicles with a mass greater than the maximum 

permissible for the type of lift. If necessary, use another 

device with a higher load capacity.

•  Lifting of vehicles with gross vehicle weight greater than 

the maximum permissible weight can cause permanent 

damage to the lift and create dangerous situations.

•  Clean the unit regularly and check its technical condition. 

Before using the device, check that moving parts operate 

without jamming and are not blocked.

•  The use of defective equipment can lead to dangerous 

situations.

•  Do not use a damaged lift. If necessary, inspect the unit and 

have damaged parts repaired, preferably by an authorised 

service centre.

•  Repairing the unit yourself can lead to dangerous situations.

•  Do not expose the lift to rain, snow or high temperatures.

•  Do not use for purposes other than lifting motor vehicles.

•  Do not alter the design of the lift. 

•  Do not leave the lift unattended when it is loaded.

•  The operator must check the correct operation at all times 

to avoid hazardous situations.

•  Do not use the unit when you are tired or under the 

influence of drugs, alcohol or medication as this may cause 

permanent damage to your health.

•  Wear protective gloves and goggles.

• 

Ensure that the jack is positioned on a firm and stable base 

before lifting.

•  Lifting vehicles when the ground is unstable can damage the 

vehicle and cause personal injury.

•  Maintain a stable posture when working with the unit. The 

correct working position ensures better control of the unit 

in unforeseen situations.

•  Dress appropriately. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving 

parts. Loose clothing, jewellery or long hair can be caught 

in moving parts.

•  Do not use the lift if you have not read this manual 

beforehand.

•  Do not lift vehicles with a mass greater than the maximum 

permissible for the type of lift. If necessary, use another 

EN

Summary of Contents for ST-105









Reviews: