GRAPH
MODE
89
Speed / Step Setting
Select measurement speed (capture timing)
Background
The speed is the same setting used in the basic
measurement (page50), except in the graph mode,
maximum speed setting is not available.
Panel operation
1.
Press the Up/Down key and move
the cursor to Speed.
Speed:
Fast
2.
If necessary, press the Left/Right
key to change the setting (time per
capture).
Slow
600mS
Med
450mS (AC), 120mS (Rdc)
Fast
150mS (AC), 60mS (Rdc)
Select step size
Background
The step size selects whether to plot every
captured data (step size 1) or to plot only the
selected data (step size 2, 4, 8 = every 2, 4, 8 data).
Step size 1: detailed graph, slow capturing
Step size 2, 4, 8: simplified graph, fast capturing
Panel operation
1.
Press the Up/Down key and move
the cursor to Step size.
Step Size:
2 4 8
1
2.
If necessary, press the Left/Right
key to change the setting.
Range
1 (plot all data), 2, 4, 8
LCR-8101
User
Manual
90
Running Graph Measurement
Run measurement
Panel operation
1.
When the configuration is
completed, press F4 (Start) to start
the graph measurement.
F 4
2.
The display changes into graph mode and starts
plotting the measurement data.
CAPACITANCE VS FREQUENCY
ABORT
20.0
40.0
60.0
80.0
100
(Hz)
300.0n
250.0n
(F)
MKR: 40.000 Hz
Cs : 247.04nF
LEVEL: 10.0mV
SPEED:FAST
*7
Measurement Ongoing
Latest Measurement
Data (Updated)
Drive Level (or Frequency)
and Speed
3.
To abort the measurement, press F6
(Abort).
F 6
4.
When completed, the buzzer sounds once and
the display shows the whole plotted data.