PASS-FAIL
MODE
55
Select test item and scale (Pass/Fail test)
Test item
To select the first measurement item,
press F1 repeatedly.
C
L X B Z Y
F 1
To select the second measurement item,
press F2 repeatedly.
Q
D R G
F 2
Circuit model
To select the circuit model, series or
parallel, press F3 repeatedly.
F 3
Scale
Press F4 (Show/Hide scale) to select
scale (Pass/Fail test).
F 4
Normal
MEASUREMENT MODE
0.01234
0.2179
mF
D
*7
C
L X B Z Y
Q
D R G
Parallel
Show Scale
50mVac
1.5000kHz
Range
Speed Med
Auto
Vm:549.8mV
Im:724.9pA
–
Pass/Fail test
MEASUREMENT MODE
0.01234
0.2179
mF
D
*7
C
L X B Z Y
Q
D R G
Parallel
Hide Scale
Abs
%
Save Nom
HI
Hi
Lo
20.0mF
0.00mF
50mVac
1.5000kHz
Range
Speed Med
Auto
Vm:549.8mV
Im:724.9pA
–
Normal mode
For Normal (basic) mode details, see page30.
LCR-8101
User
Manual
56
Set parameters
For more detailed descriptions, see Basic measurement, page41.
How to edit
Example
100mV
m
V/A
Enter
Backspace
All clear
Clear
Increase
Decrease
When the entered value does not fit in the
range, the nearest available value is selected.
Nearest Available
When the wrong unit (such as
Ω
) is entered,
the value is cancelled.
Unit Mismatched
Measurement
range (to Auto)
Press the Left/Right key repeatedly to
move the cursor to Range position, and
use the Up/Down key to select Auto (if
necessary).
Speed Slow
Range Auto
Single mode
Press the Sing/Rep key repeatedly to
select Single (manual trigger). To trigger
measurement, press the Trigger key.
Sing/Rep
Trig
Repetitive mode
Press the Sing/Rep key repeatedly to
select Rep (automatic trigger). Press the
Left/Right key repeatedly to move the
cursor to Speed, and use the Up/Down
key to select the update rate.
Sing/Rep