GW Instek LCR-8101, User Manual, Page: 36 / 59

PASS-FAIL MODE
71
Multi-Step Program File Operation
Save program
Save (overwrite)
Press F4 (Save) to save the program
being edited. A confirmation message
appears on the display.
Program saved
F 4
Save as (new
program)
1. Press F5 (File), then F3 (Save As).
The new program name dialogue
appears.
F 5
F 3
2. Enter the new program name using the arrow
keys.
Move cursor
(Left/Right keys)
JKLM N OPQRS
Enter the letter
(Down key)
program name: N_
Delete one letter
(Up key)
program name: _
LCR-8101 User Manual
72
3. Press the Enter key to confirm the
file name. To quit the Save as mode,
press the Clear key.
Enter
Clear
4. The display goes back to the previous mode,
with the program changed to the new name.
MULTI STEP MODE
Delete
Step
PROGRAM: NEW
Set
–
Func
Freq
Volt
Bias
Spd
Hi
Lo
Dly
500.00mS
01 02 03
B Rdc OFF
1.0000k
10mV
MAX FAST
1.0000 S
9999 ms 0 mS
1.00 V
0.0000 Ω
0.0000 Ω
Prog
Copy
Save
File
RUN