GVM-VAC GVM6600-CM, Owner'S Manual

Page: 44 / 131

44
GVM-VAC
www.gvm-vac.com
Maintenance Section
Figure 4.3g
Never go under the dump body unless the body is
empty and the body prop(s) is in the proper posi-
tion.
The body prop is designed and intended to sup-
port an EMPTY truck body in the raised position.
Unload the body before using the body prop(s).
Grease
Fitting
4.3 Lubrication, continued;
Lubrication Points, continued;
Figure 4.3h
Each pillow block bearing should be greased with a
high temperature lithium based EP#2 grease once a
week.
9. Boom Cylinders (figure 4.3h & 4.3i): Grease the
pivot joints of the boom cylinder and boom pivots with
a high temperature lithium based EP#2 grease once a
weak.
Figure 4.3i