GVM-VAC GVM6600-CM, Owner'S Manual

Page: 21 / 131

21
GVM-VAC
www.gvm-vac.com
Pre-Operating Section
2.1 Instruments and Controls, cont.:
Throttle Control:
This switch increases or decrease the throttle of the
engine. Pressing the top side of the button increases the
throttle and pressing the bottom of the button decreases
the throttle. The longer the button is pressed the more
the throttle moves in that direction.
Note: The throttle does NOT work unless the Remote
PTO switch is in the center position. (fig. 2.1A)
Fuel Gauge:
This indicates the amount of fuel left in the fuel tank. Fig.
2.1A.
Joystick:
Controls the 3 axis hose boom assembly. The
buttons on the joystick raise and lower the boom
while the joystick move the boom in/out and left/
right. (fig. 2.1B)
Remote PTO/Clutch Engagement:
This is a 3-position switch which engages and
disengages the PTO. To engage the PTO,
press the top of the switch.
Note: In order for the PTO to engage;
• the throttle must be at idle, and
• Door Latches must be locked
To disengage the PTO press the bottom of the
switch. (fig 2.1A)
Figure 2.1B
Joystick
Figure 2.1C