GVM-VAC GVM6600-CM, Owner'S Manual

Page: 42 / 131

42
GVM-VAC
www.gvm-vac.com
Maintenance Section
4.3 Lubrication, continued;
Lubrication Points, continued;
Figure 4.3b
Figure 4.3c
Grease
Fittings
Figure 4.3d
ings once every week with a multi-purpose moisture
resistant #2 grease.
3. PTO Cross Shaft Fitting (figure 4.3c): The PTO cross-
over shaft and linkage should be lubricated with high
temperature lithium base #2 lubricant after 200 hours of
operation.
4. Hinge and Friction Points: Leaf vacuum operation
and longevity can be improved by keeping hinges and
friction points lubricated. GVM recommends that lubri-
cation be performed weekly. Use SAE30 weight oil on
hinges and a premium grade, high temperature lithium
based EP#2 grease on friction points.
5. Door Latch Hook (figure 4.3d): Grease both hooks
with high temperature lithium based EP#2 grease once
a week.
6. Hydraulic Hoist Fittings (figure 4.3e): Raise and