13
GVI Security
Make appropriate changes of the begin/end time of Day and Night using Direction
keys
Press Enter to confirm the settings or Exit to cancel
If a weekend record is required, select “ON” to enable the Weekend Schedule in
advance and then set the Weekend begin/end time
Press Exit to return to previous page
3.5.3 Quality/
FPS
Use the “QUALITY/FPS” to select the recording quality and frame rate. In normal
circumstances, set the quality configuration as “BEST”. The following table shows the
FPS and picture size under “BEST” in D1 mode for AR-6160 as an example.
D1 mode (NTSC: 720X480@120FPS; PAL: 720X576@100FPS)
Normal PPS
Normal Size
Event PPS
Event Size
7.5 NTSC
(6.25 PAL)
10 KB / PIC
30 NTSC
(25 PAL)
10 KB / PIC
3.5.4 Advance
d Setup
Use this function to set the Day/Night/Weekend FPS (Frame per Second) and Quality
separately for each channel. Set the QUALITY/FPS selection to “ADVANCED SETUP”
to set these schedules. The menu displays as shown below (Record Mode:
720X480@120FPS in NTSC/720X576@100FPS in PAL).
ADVANCED SETUP
CHANNEL
NORMAL FPS
NORMAL QUALITY
EVENT MAX FPS
EVENT QUALITY
DAY
7.5
HIGH
30
BEST
NIGHT
7.5
HIGH
30
BEST
CH01
WEEKEND
7.5
HIGH
30
BEST
Select a CHANNEL for setting its record configuration
Move the
cursor
using Direction keys and press
Enter
to select an item
Change the
value
using UP/DOWN keys
Press
Enter
to confirm the settings or Exit to cancel
Press Exit to return to the Record menu
The total normal FPS for all channels cannot exceed 120 NTSC/100 PAL. Reduce the
other channels first to increase one channel’s FPS. Event FPS is not restricted to this
rule since a smart event scheduler handles the total FPS with a correct weight.
