![background image](http://html1.mh-extra.com/html/gutmann/mega-macs-pc/mega-macs-pc_user-manual_2279231075.webp)
mega macs PC
11.5.7.2 Performing Automatic Coding Procedures
WARNING
The ECU is not coded or is incorrectly coded
Death or severe injuries of persons due to improper or even wrong ECU operation
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
•
Some working procedures require a specific training, e.g., working on the airbag.
•
Regard the window with infos and instructions.
Proceed as follows to perform an automatic coding procedure:
1. Perform steps 1 to 11 as described in the section
CAUTION
Pulling off of the PC VCI when actuating the clutch
Risk of injury or material damage
Proceed as follows before starting:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with infos and instructions.
NOTICE
Short circuit and voltage peaks when connecting the PC VCI
Danger of destruction of automotive electronics
Switch off ignition before connecting the PC VCI to the vehicle.
2. Connect the PC VCI to the vehicle's diagnostic connector.
Both LEDs of the PC VCI flash. The PC VCI is ready for operation.
3. Select
Diagnostics > Function > Codings
.
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
•
Functions
•
Assemblies
•
Systems
•
Data
4. Select the requested assembly.
5. Select the requested system.
6. Observe the info window.
7. Call up the
>Information<
tab.
8. Follow the instructions on the screen.
9. Start automatic coding with
.
Communication to vehicle is being established.
10. Regard the window with infos and instructions.
11. Confirm the window with infos and instructions with
.
Coding is performed automatically.
75