mega macs PC
11.5.6 Basic settings
Here you can adjust or adapt components and ECUs according to manufacturer's specifications.
11.5.6.1 Preconditions for Basic Settings
Regard the following in order to perform basic settings:
•
Vehicle system is working properly.
•
No trouble codes saved in ECU memory
•
Vehicle-specific preparations performed.
11.5.6.2 Performing Manual Basic Settings
WARNING
Wrong or incorrectly performed basic settings
Risk of injury or material damage to vehicles
Regard the following when performing basic settings:
•
Select the correct vehicle type.
•
Regard the window with infos and instructions.
Proceed as follows to perform the manual basic setting:
1. Perform steps 1 to 11 as described in the section
CAUTION
Pulling off of the PC VCI when actuating the clutch
Risk of injury or material damage
Proceed as follows before starting:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with infos and instructions.
NOTICE
Short circuit and voltage peaks when connecting the PC VCI
Danger of destruction of automotive electronics
Switch off ignition before connecting the PC VCI to the vehicle.
2. Connect the PC VCI to the vehicle's diagnostic connector.
Both LEDs of the PC VCI flash. The PC VCI is ready for operation.
3. Select
Diagnostics > Function > Basic settings
.
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
•
Functions
•
Assemblies
•
Systems
•
Data
71
