mega macs PC
Update of the mega macs PC and PC VCI Software
6. Should the list nevertheless include incorrect files, start the update again.
10.2.5 Starting the Software Update
Start the software updates here.
Proceed as follows to start the software update:
1. Select
Update
under
> Settings
in the main menu.
2. Select
>System<
.
3. Open the list under
Step
with
.
4. Select
>Update<
.
NOTICE
Insufficient voltage supply
System data loss
Do not switch off the PC and the PC VCI during the software update and do not disconnect both
from voltage supply.
Ensure sufficient voltage supply.
5. Start
Update
with
.
The device searches for a new update that will then be downloaded and installed.
The mega macs PC software will be finished automatically upon a successful software update. The installation will be
checked automatically after startup.
10.2.6 Calling up PC VCI Information
Here you will find all information required for the identification of the PC VCI.
Proceed as follows to call up the PC VCI information:
1. Select
Update
under
> Settings
in the main menu.
2. Select
>PC VCI<
.
An info window appears.
This menu provides the software and hardware version and the module type of the PC VCI.
10.2.7 PC VCI Update
NOTICE
Insufficient voltage supply
System data loss
Do not switch off the PC and the PC VCI during the PC VCI update and do not disconnect both from
voltage supply.
Ensure sufficient voltage supply.
Proceed as follows to start the PC VCI update:
1. Select
Update
under
> Settings
in the main menu.
32
