User module »U2-R-CON«
Target and user modules ·
93
Installation
Connecting the console devices
RS232:
Connect the serial end device to this interface.
Trans.:
Use a category 5e (or better) twisted pair cable to connect this interface to the
Dynamic Port
of the
USB/RS232 Main Channel
that is assigned to the console.
USB 2.0 Devices:
Connect up to 4 USB devices to these interfaces.
Power In:
Connect the power cable to the power pack and a power outlet.
Status displays
The blinking Transmission LEDs show the following connection statuses:
LED
Colour
Status
Meaning
Left
Yellow
Off
No connection to network.
On
A user module is accessing the target module.
Right
Green
On
A user module is accessing the target module.
Blinking
No communication with matrix switch.
Flashing
Connection to matrix switch established successfully.
No user module is accessing.
Summary of Contents for DP-CON
Page 123: ...NOTES...
