Target module »VGA-CPU-UC«
Target and user modules ·
41
Installation
Connecting the target computer
Keyb.:
Use the purple plug of the Twin-PS/2 cable to connect the computer’s PS/2
keyboard interface to this interface.
Mouse:
Use the green plug of the Twin-PS/2 cable to connect the computer’s PS/2
mouse interface to this interface.
USB K/M:
Use the USB device cable to connect one of the computer’s USB interfaces
to this interface.
VGA CPU:
Use the supplied video cables to connect the computer’s analogue video
output to this interface.
Line In:
Use one of the supplied audio cables to connect the computer’s
Line Out
interface to this interface.
Line Out:
Use one of the supplied audio cables to connect the computer’s
Line In
inter-
face to this interface.
Connections to the matrix switches
Trans. 1:
Connect this interface to a
Dynamic Port
(RJ45) of the
first
matrix switch.
Trans. 2:
Connect this interface to a
Dynamic Port
(RJ45) of the
second
matrix switch.
NOTE:
Keyboard and mouse signals can be transmitted to the computer using
either
the PS/2 interfaces or the USB interface.
IMPORTANT:
Connect only one of the target module’s
Trans.
interfaces for each
matrix switch!
NOTE:
Only use category 5e (or better) twisted pair cables to connect the devices.
ADVICE:
You can also connect the target module
directly
to up to two compatible
user modules.
Mouse
Keyb.
USB K/M
VGA CPU
Power
Trans. 1
Trans. 2
Service Line In Line Out
Power In
Summary of Contents for DP-CON
Page 123: ...NOTES...
