Target module »DVI-CPU-Fiber«
Target and user modules ·
25
Status displays
The LED on the back panel of the target module shows the status of the external
power pack:
The blinking LEDS on the back panel highlight the following operating statuses of
the particular connection:
LED
Status
Meaning
Power
On
The external power pack is connected and the required voltage (12 Volt)
is available.
Off
The external power pack is not (properly) connected.
LED
Status
Meaning
Yellow
Off
No user module accesses the target module.
On
A user module accesses the target module.
Blinking
The incoming video signal was not detected.
Flashing
No voltage at PS/2 interface or USB bus.
Green
Off
The target module is turned off.
Blinking
The power pack is connected and supplies the required power.
The connection to the matrix switch could not be established.
Flashing
The connection to the matrix switch is established.
No user module is accessing or the computer is turned off.
On
A user module accesses the target module.
A computer is connected and turned on.
Flickering Keyboard and mouse inputs are transmitted by the accessing user module.
The flickering is defined by the user’s inputs.
Summary of Contents for DP-CON
Page 123: ...NOTES...
