Target module »DP-CPU-UC«
Target and user modules ·
37
Installation
Connecting the target computer
Keyb.:
Use the purple plug of the Twin-PS/2 cable to connect the computer’s PS/2
keyboard interface to this interface.
Mouse:
Use the green plug of the Twin-PS/2 cable to connect the computer’s PS/2
mouse interface to this interface.
USB K/M:
Use the USB device cable to connect one of the computer’s USB interfaces
to this interface.
DP CPU:
Connect the computer’s
Display Port
digital video output to this interface.
Line In:
Use one of the supplied audio cables to connect the computer’s
Line Out
interface to this interface.
Line Out:
Use one of the supplied audio cables to connect the computer’s
Line In
inter-
face to this interface.
Connections to the matrix switches
Trans. 1:
Connect this interface to a
Dynamic Port
(RJ45) of the first matrix switch.
Trans. 2:
Connect this interface to a
Dynamic Port
(RJ45) of the second matrix switch.
NOTE:
Keyboard and mouse signals can be transmitted to the computer using
either
the PS/2 interfaces or the USB interface.
IMPORTANT:
Connect only one of the target module’s
Trans.
interfaces for each
matrix switch!
NOTE:
Use only category 5e (or better) twisted pair cables to connect the devices.
ADVICE:
You can also connect the target module
directly
to up to two compatible user
modules.
Mouse
Keyb.
USB K/M
DP CPU
Summary of Contents for DP-CON
Page 123: ...NOTES...
